I have changed the screen on an e-system 3089 uk laptop. Now it wont start-up at all.?
It was booting up previously but was useless as the original screen was physically damaged for all but a quarter of it. The screen I have fitted is an identical one part numbers match etc although it is a used part, but guaranteed to be good. I have taken all precautions against electro-static damage while changing the screen. All the plugs are secure and correctly fitted but it does not start now. Not even the fan is running. The ac adapter is fine and the charge light on the laptop comes on when it is plugged in. Any suggestions or tips? Steve.
Laptops & Notebooks - 1 Answers
People's Answers, Critics, Comments, Opinions :
Answer 1 :
Disconnect your new screen and see if laptop boots. If so try old screen again. This will narrow down the problem. If neither screen allows boot up it is likely that you have disturbed a connector, just open up and detach and re-attach everything that plugs in. Also make sure you haven't strained a wire and broken a joint.
Read more discussions:
